| Timer for incandescent or halogen lights, and fans |
| Use with either lights or a fan, not both |
| Various time settings up to 60 minutes |
| Load briefly turns off and then back on again one minute before the timer is set to turn the load off. This function cannot be disabled |
| Offers an override to keep the light or fan on continuously |
|
| Troubleshooting |
| Problem: Light or fan does not turn completely off or turns on/off repeatedly |
| Timer may not be meeting minimum load requirements. If the load is less than 40 watts, you may need to use the MA-T51MN model instead (which has a minimum load of 5 watts) |
| Problem: Load turns off and then back on |
| This may be the 1 minute warning feature letting you know the timer will shut off in 1 minute |
| Problem: When I turned the power on, my fan/light came on, but I can't turn it off and my timer switch doesn't have any LEDs on |
| First, check to make sure power is flowing through the timer switch |
| Below the main tap button, pull out the air gap switch (FASS tab). If this turns your fan/light off, power is flowing through the switch, but the fan or light is not meeting the minimum load requirement |
| If you have a neutral wire connection available, you may need to use the MA-T51MN instead (minimum load 5 watts, .05 amps)
|
