I was really surprised at how well this worked for the money. I have a 55" LED that I wanted to hand and didn't want to spend a lot as I'll move/replace it at some point. I have a 75", which has a much more expensive mount with the tilt, pull out and swivel. It's an awesome mount, although it cost 3x as much.
I wanted to hang my TV up around 8' and tilt a bit so I could see it from my desk that is about 18' away. This mount achieved this without a problem. With my 55" TV, I could tilt it just the right amount. Given that the mount is pretty close to the wall, I don't think a larger TV would allow that much tilt. Just doing a bit of off the top measuring, a 75" probably wouldn't have any tilt because the mount doesn't come out from the wall more than a couple inches.
Installation was a breeze. The part of the mount that goes in the wall has a level built into it and only takes four screws. I spent more time centering it up where I wanted than actually screwing it in. The two arms that attach to the TV have plenty of options for sizes, so I'd suspect you'd be hard pressed to find a TV that wouldn't fit it. Amazon supplied ample screw sizes and spacers, so I didn't need to search for the proper size outside the purchase. Once you attach the arms, just hand the arms on the mount and make sure the latch on the bottom snaps on. Only way for the TV to then come off without releasing the latches is to slide it all the way off the side (you'd have to intentionally want this to happen). The strings that hang for releasing the latches were a cool little design and easy enough to tuck away out of sight.
For the money, this is a great mount and easy to install. It's very flush, so if you need to get cables in place before hanging (I couldn't get my hand behind the TV once hung, my wife could a bit). As long as your TV cable connections are parallel to the TV, spacing behind the TV wouldn't be an issue. You only have a down tilt, which will be less of a tilt with a larger TV. I would definitely purchase this again for similar needs.
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Hard Rock apparel
Outerwear, tees, and accessories. Discover the rock shop.
Consider a similar item
Amazon's Choice
Frequently bought together
$37.99
Get it as soon as Tuesday, May 14
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may ship from close to you
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
Amazon Basics TV Wall Mounts
Flat Panel TV Wall Mount
Designed to mount and move TVs securely from a wall, the brackets support flat panel TVs and include hardware and instructions for easy installation.
Dynamic Viewing
The wall mounts add dynamic viewing to any room with adjustable tilt, swivel and extension features. Multiple styles available for your viewing needs.
Adjustable Positioning
Single, dual and triple arm wall mounts extend from the wall to suit your space, and are designed to mount securely into wood wall studs.
Durable Construction
Made of heavy-duty aluminum and powder-coated steel with included metal hardware and bubble level for secure, accurate positioning.
Compare with similar items
This Item  Amazon Basics Heavy-Duty Tilting TV Wall Mount for 37" to 80" TVs up to 120 lbs, Black |  |  |  |  |  | |
| Price | $37.99 | -6% $44.99 List: $47.79 | $69.99 | -18% $49.99 List: $60.99 | $31.89 | -33% $59.99 List: $89.99 |
| Delivery | Get it as soon as Tuesday, May 14 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 | Get it as soon as Monday, May 13 |
| Customer Ratings | ||||||
| Sturdiness | ||||||
| Easy to install | ||||||
| Easy to assemble | ||||||
| Value for money | ||||||
| Range of motion | ||||||
| Sold By | Amazon.com | Mounting Dream | Mounting Dream | RJTKJ | Amazon.com | Home and Around Products |
| max compatible size | 80 inches | 86 inches | 90 inches | 100 inches | 32 inches | 90 inches |
| min compatible size | 37 inches | 42 inches | 42 inches | 42 inches | 32 inches | 42 inches |
| mounting type | Wall Mount | Wall Mount | Wall Mount | Wall Mount | Wall Mount | Wall Mount |
| movement type | Tilt | Tilt | Tilt | Fixed | Fixed | Tilt, Swivel |
| maximum tilt angle | 18 degrees | 15 degrees | 17 degrees | 0 degrees | — | 12 degrees |
| material | Alloy Steel | Metal | Alloy Steel | Alloy Steel | Alloy Steel | — |
Reviews with images
Very nice and heavy duty mount offering great tilt ranges but 1 problem...
This is a very strong, yet inexpensive TV mount that comes with everything and more you could need to mount most any TV. However, the bubble level built into the mount was off a bit so don't trust it. Before I drilled my holes for the lag bolts I double checked the levelness of the bracket with my contractor's level and also a smart phone level app and they both confirmed the built-in level was off a bit. Now, many people may not notice it but I would. I mounted a 55" TV and decided to only use 2 of the 4 included massive lag bolts. There is just no need to drill 4 holes in a wall and sink 4 lag bolts for a 55" TV but if you are up in the 70"-80" range maybe? Anyway, having the expanded tilt range allows a TV to be mounted higher and still properly pointing at you. I put this one in a spare bedroom so with one's head on a pillow in the bed the TV is still aimed directly at guests. Anyway, a great value for the price and the fact that the mount is one piece and wide means you can tap 2 studs that may not be centered where you want the TV to be and still get the TV perfectly centered for your room along the mount. Yes, this is a 2-person job no doubt and it takes some time... as they say, measure 2 or 3 or 10 times and then drill once so everything ends up just where you want it. Adding 1 more hint... If you are going to mount a TV higher like I did and you need to angle it down more you want to attach the 2 brackets to the back of the TV so they are as low as possible so the bottom of the TV doesn't hit the wall when tilted down. So, when you are putting the 2 brackets on the back of the TV you want the top holes on those 2 brackets screwed into the 2 top holes on the TV. Then adjust put the other 2 screws into the lower holes on each side. I did this first so I could then measure and know where to place the permanent mount on the wall that requires drilling and sinking those lag bolts into 2 studs.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on August 2, 2017
Reviewed in the United States on March 19, 2024
This has been holding up my tv for a few months now no problem. It was easy to put up no problem
Images in this review
Reviewed in the United States on October 1, 2023
Reviewed in the United States on September 2, 2023
Very nice and heavy duty mount offering great tilt ranges but 1 problem...
Reviewed in the United States on September 2, 2023
This is a very strong, yet inexpensive TV mount that comes with everything and more you could need to mount most any TV. However, the bubble level built into the mount was off a bit so don't trust it. Before I drilled my holes for the lag bolts I double checked the levelness of the bracket with my contractor's level and also a smart phone level app and they both confirmed the built-in level was off a bit. Now, many people may not notice it but I would. I mounted a 55" TV and decided to only use 2 of the 4 included massive lag bolts. There is just no need to drill 4 holes in a wall and sink 4 lag bolts for a 55" TV but if you are up in the 70"-80" range maybe? Anyway, having the expanded tilt range allows a TV to be mounted higher and still properly pointing at you. I put this one in a spare bedroom so with one's head on a pillow in the bed the TV is still aimed directly at guests. Anyway, a great value for the price and the fact that the mount is one piece and wide means you can tap 2 studs that may not be centered where you want the TV to be and still get the TV perfectly centered for your room along the mount. Yes, this is a 2-person job no doubt and it takes some time... as they say, measure 2 or 3 or 10 times and then drill once so everything ends up just where you want it. Adding 1 more hint... If you are going to mount a TV higher like I did and you need to angle it down more you want to attach the 2 brackets to the back of the TV so they are as low as possible so the bottom of the TV doesn't hit the wall when tilted down. So, when you are putting the 2 brackets on the back of the TV you want the top holes on those 2 brackets screwed into the 2 top holes on the TV. Then adjust put the other 2 screws into the lower holes on each side. I did this first so I could then measure and know where to place the permanent mount on the wall that requires drilling and sinking those lag bolts into 2 studs.
Reviewed in the United States on September 2, 2023
Images in this review
Reviewed in the United States on November 25, 2020
Top reviews from other countries
Bazregan
Very Good Value, easily fitted
Reviewed in the United Kingdom on June 27, 2020
Evelyn
Muy contenta con este acierto, precio/calidad inmejorable
Reviewed in Spain on August 30, 2018DC
tolles Produkt mit einer ganz miserablen Gebrauchsanweisung
Reviewed in Germany on July 5, 2017dan haouzi
VIS NON COMPATIBLES SAMSUNG 55KU6400
Reviewed in France on April 29, 2017