I've had my Vizio 3D 47" LED TV for about three years now. My TV weighs 51.8 pounds. This is my 3rd mount (haha). The first mount I got was from Sam's Club and was supposed to be designed for flat screens that were up to 47". But it was terribly weak, and you could see the tube steel actually warp a bit when moving it. Then I got another one here on Amazon (Mount-It! Vizio Compatible Swivel TV Mount) but after 6 months, it began to come apart. Although it never dropped the TV, it was pretty close to doing so. This one had great reviews, so I thought I would try it. My complete review is below ....
1) Strong for the size. Its about half the weight of other heavy duty adjustable mounts that I have purchased on Amazon before. Yet its strong and doesn't warp or bend when articulating from side to side. I am very impressed with it. 5 of 5 stars
2) Tilt Adjustment. The tilt adjustment, which angles the top down or up, is quite good. It uses a flip up lever and when you push down, it clamps it firm. Others use a screw knob which is much more difficult. 5 of 5 stars
3) No Level. This unit does not come with a built in level, but I just used my own. 4 of 5 stars
4) Small Base. As others have said, this unit has a small foot print and could make it difficult to mount in the correct room position. Fortunately for me, the mounting stud is at the center of where I mount the TV. 3 of 5 stars
5) Right and left articulating swing angle. This type of mount is good because it provides and right and left articulating swing angle. My eating table is a raised bar height table to the left of the TV. The swing angle allows me to swing the TV over to the table when I am enjoying a meal. However, when I am cooking in the kitchen, I need to swing it to the opposite side. The angle is not quite as high as others because the articulating frame is not as long as other mounts do because of its size. But it still works for me and should for most people. 5 of 5 stars
6) Overall Design. I like the way the bolts, especially for the articulating swing mechanism, are easily accessible. This allows for an easy visual inspection to see if the bolts are tight. Other mounts have the bolts hidden and can't be adjusted or tightened which could cause the TV to fall if they become loose. 5 of 5 stars
7) Level when articulating to the left or right. As others have mentioned, nearly all these types of mounts to tend to warp a bit when articulating to the extreme left or right. However, because this works well with my heavy 47" TV weighing at 51.8 lbs, it does not warp and therefore the level does not need to be readjusted every time I swing to the right or left. I would say if you have a heavier or larger TV, that might be a problem with this particular mount. The last mount I purchased did have a better mechanism for leveling after articulating - You just leveled the TV with your hands. So, therefore I would be cautious when using anything above a 50" TV if you didn't want to mess with the level every time you articulated to the left or right. Again, I am pleasantly surprised how well it does with my 51.8 lb Vizio 47" TV.
8) Ease of mounting. I was able to do mount the frame to the wall, and mount the TV to the frame by myself. Two people would be better, especially if you have a heavier TV. 5 of 5 stars
9) Smooth Operation. The articulating frame is extremely smooth and it doesn't take very much effort to return the TV to the center position. Its much smoother than the other mounts I have owned. 5 of 5 stars
As others have said, this is a very good mount and strangely strong for how light it is. I have no problem recommending it for flat screens that are heavy up to 47" in size. My previous mount that this one replaced was listed as "Mount-It! Vizio Compatible Swivel TV Mount for 32-60" Plasma & LCD". I would not recommend it because the articulating bolts came loose and there was no way to tighten them.
I fully recommend this mount
Enjoy fast, free delivery, exclusive deals, and award-winning movies & TV shows with Prime
Try Prime
and start saving today with fast, free delivery
Hard Rock apparel
Outerwear, tees, and accessories. Discover the rock shop.
Consider a similar item
Amazon's Choice
Frequently bought together
$34.99
Get it as soon as Tuesday, May 14
In Stock
Total price:
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
From the manufacturer
Full Motion Tilt Swivel Articulating TV Wall Mount MW340B2
The MW340B2 is a low profile full motion TV wall mount. Made to be mounted into double studded walls for extra rigidity, two articulating arms added strength to safely support today’s newer, thinner TV. Designed for TV with 100 x 100mm to 400 x 400mm mounting hole pattern, and the MW340B2 holds up to 100 lbs, mounting to 16” dual stud, single stud or solid wall. The MW340B2 low profiles mount with a flat depth of only 2.3 inches, you will have a very sleek, against the wall design. It also can extend out 14” for easy access, swivel and tilt to give any seat in the house the perfect viewing angle. Notice: This mount fits most 32-65 inch TVs (VESA hole patterns from 100x100 mm (4x4") to 400x400mm (16x16") ), do not work for some old size 50-65 inch TVs manufactured before 2013.
Compare with similar items
This Item  VideoSecu MW340B2 TV Wall Mount Bracket for Most 32-65 Inch LED, LCD, OLED, UHD Plasma Flat Screen TV, with Full Motion Tilt Swivel Articulating Dual Arms 14" Extend,400x400mm,100 LBS WR9 |  |  |  |  |  | |
| Price | $34.99 | -14% $42.99 List: $49.99 | $44.99 | $39.99 | -29% $49.99 List: $69.99 | -24% $41.98 List: $54.99 |
| Delivery | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Wednesday, May 15 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 | Get it as soon as Tuesday, May 14 |
| Customer Ratings | ||||||
| Range of motion | ||||||
| Easy to install | ||||||
| Sturdiness | ||||||
| Mounting system | ||||||
| Value for money | ||||||
| Sold By | Warehouseseller | X-Mount | Home*Vision | Bestergo Direct | X-Mount | Pipishell |
| max compatible size | 65 inches | 65 inches | 65 inches | 65 inches | 82 inches | 75 inches |
| min compatible size | 32 inches | 32 inches | 26 inches | 32 inches | 37 inches | 37 inches |
| mounting type | Wall Mount | Wall Mount | Wall Mount | Wall Mount/Articulating/Full motion/swivel/tilt | Wall Mount | Wall Mount |
| movement type | Tilt, Articulating, Swivel | Tilt, Swivel, Articulating | Swivel, Tilting, Leveling, Rotate, Articulating,Extension, Full motion TV wall mount | Articulating Full motion Swivel Tilt Extend Wide rotation | Articulating | Swivel |
| maximum tilt angle | 15 degrees | 15 degrees | 15 degrees | 15 degrees | 15 degrees | -15 degrees |
| material | Wood | Iron | Alloy Steel | Alloy Steel | Alloy Steel | Alloy Steel |
Videos
Page 1 of 1Start OverPage 1 of 1
Videos for this product
0:39
Click to play video
Customer Review: Will never buy a different mount again
Adam Householder
Videos for this product
0:43
Click to play video
Tv mount is sturdy and can adjust and move easily!
Melissa
Reviews with images
Pretty decent. Holds our 46" Sony Bravia well. Dual Mount model.
I just installed this today (07 07 19)...did most of it myself, but needed my husband's help with lifting the TV up onto the mounting rail (I'm 40+ female/5'5"/average build/DIYer). The instructions were pretty good. No major problems.But, I would say the only "issue" I had with the instructions was in regard to the sets of screws labled "D, E, F, G, H, I"....the instructions tell you to use screws "D-I" when mounting the brackets to the TV, which initially seemed confusing to me. It might be nice if the instructions were to, instead, state: "Use ONE of the screw sets provided labeled D-I that fit your television. The remaining sets of screws will not be used" (the "F" screws fit our Sony Bravia). The remaining screws could certainly be used for another project, or if you change your TV to another brand and/or size.The mobility seems a bit stiff out-of-the-box. We're hoping it will losen up some with regular use, however, we won't be moving it much. The TV is in our den next to the kitchen and we aren't in there all that much so the TV is turned facing the kitchen, but can be seen well from the sectional sofa in the den. I realize there are bolts at the joints, but I hesitate messing with those just yet.I did a lot of [online] research before deciding on this VideoSecu MW340B2 (dual mount) instead of the similar Mounting Dream MD2380/HM2380 because I prefer the one-piece/one-sheet backplate (that attaches to the wall) and the plate that attaches to the TV. There aren't multiple sections welded nor bolted together on either piece like many other wall mounts I've seen. I'm certainly no engineer, but it seems to me it should result in fewer weak areas that could be compromised due to movement & weight.It only took me about an hour, including carefully measuring to be sure the top of the TV will be just below the clock & picture above (see photos). The last photo is the Sony stand we removed.Note: we prefer this TV be eye-level when viewing from the couch in our den, which is why it isn't higher up, like it might be in a bedroom.Overall, a decent television wall mount for the money.
